![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-147.png)
Switching procedure :
To switch the hazard indicator and horn (chime)
operation, push the LOCK
䊊
1
and UN-
LOCK
䊊
2
buttons on the Intelligent Key
simultaneously for more than 2 seconds.
●
When the hazard indicator mode is set, the
hazard indicator flashes 3 times.
●
When the hazard indicator and horn mode is
set, the hazard indicator flashes once and
the horn chirps once.
1. Pull the hood lock release handle
䊊
1
located below the instrument panel; the
hood will then spring up slightly.
2. Pull the lever
䊊
2
up at the front of the
hood with your fingertips and raise the
hood.
3. When closing the hood, slowly close the
hood down to latch both the right and left
locks. Push the hood down to lock the
hood securely into place.
WARNING
●
Make sure the hood is completely closed and
latched before driving. Failure to do so could
cause the hood to fly open and result in an
accident.
●
If you see steam or smoke coming from the
engine compartment, to avoid injury do not
open the hood.
SPA2733
HOOD
3-16
Pre-driving checks and adjustments
췽
—
—
01/12/10—pattie
墍