![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-031.png)
Install
1. Align the headrest stalks with the holes in
the seat. Make sure that the headrest is
facing the correct direction. The stalk with
the adjustment notches
䊊
1
must be in-
stalled in the hole with the lock knob
䊊
2
.
2. Push and hold the lock knob and push the
headrest down.
3. Properly adjust the headrest before an
occupant uses the seating position.
ARMREST
Rear armrest
Pull the armrest forward until it is horizontal.
Trunk pass-through
The rear center seatback can be folded to allow
trunk access from inside of the vehicle.
To access the trunk, pull down the rear center
armrest and pull out the trunk pass-through lid
䊊
1
.
To lock the lid, use the mechanical key and turn
it to the LOCK position
䊊
2
. To unlock, turn the
mechanical key to the UNLOCK position
䊊
3
. For
the mechanical key usage, see “KEYS” in the “3.
Pre-driving checks and adjustments” section.
Make sure that the mechanical key is removed
from the trunk pass-through lid key cylinder
before opening or closing the lid. Otherwise the
lid and the rear armrest may be damaged.
SSS0996
SSS1061
SSS0479
1-10
Safety — Seats, seat belts and supplemental restraint system
췽
—
—
01/11/10—pattie
墍