![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-160.png)
●
Audio system
To use the memory function, lock the doors with
the Intelligent Key that is linked to the settings.
To enable the memorized settings:
1. Carry the Intelligent Key that is linked to
the settings, and unlock the doors by
pushing the driver’s door handle request
switch or UNLOCK
button on the
Intelligent Key.
2. Push the ignition switch to the “ON”
position. “Connection with the key has
been done” will be displayed on the
screen and the memorized settings are
available (only when a new Intelligent Key
is used).
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
●
When the vehicle speed is above 4 MPH
(7 km/h).
●
When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
●
When the memory switch 1 or 2 is not
pushed for at least 1 second.
●
When the seat, steering column and outside
mirrors have already been moved to the
memorized position.
●
When no position is stored in the memory
switch.
●
When the engine is started while moving the
automatic drive positioner.
●
When the selector lever is moved from the P
(Park) position to any other position. (How-
ever, it will not be canceled if the switch is
pushed while the seat and steering column
are returning to the previous positions
(entry/exit function).)
●
When the driver’s door remains open for
more than 45 seconds and the ignition
switch is not in the ON position.
●
The seat synchronization function is auto-
matically disabled if the outside mirrors or
steering wheel reaches its maximum adjust-
ment.
●
The seat synchronization function will not
operate if the seat is adjusted over one of
the following maximum thresholds:
– Seat sliding: 3.0 in (76 mm)
– Seatback reclining: 9.1 degrees
– Seat lifter (rear side): 0.8 in (20 mm)
Pre-driving checks and adjustments
3-29
췽
—
—
07/14/10—dstomski
墍