Инструкция для INFINITI M56 (2011)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

indicator light on the

button illumi-

nates when the system is operating.

●

The air flow control is not available in the

front defogger mode. When the “

”

button is pushed while the Forest Air™
system is turned on, the Forest Air™ system
will turn off.

Operating tips

Breeze Mode :

When this mode is ON, fan speed fluctuates
during the Forest Air™ system operation, creat-
ing a wind breeze similar to a natural breeze
using a combination of the upper ventilator and
the center ventilators at random.

●

Breeze Mode will activate after the tempera-
ture of the passenger compartment becomes
suitable.

●

This function will not operate immediately
after the engine starts.

●

Breeze Mode is activated when the air flow

mode is in the

⬙

and

⬙

mode.

●

This function will turn off if the fan speed or
a ventilator outlet is manually adjusted.

●

The breeze patterns may change in accor-
dance with the amount of sun load.

●

When operating fan speed or air flow control
while the Forest Air™ system is turned on,

the “

” indicator light on the button will

turn off automatically, and the Breeze Mode
function will turn off.

●

When the Breeze Mode function is turned off
while the Forest Air™ system is on, the
Breeze Mode function will remain off until

the “

” button is turned off and on

again.

Outside odor and exhaust gas detection sensor :

This vehicle is equipped with an outside odor
and exhaust gas detection sensor. When the
automatic intake air control is on, the sensor
detects odors and exhaust gas, and then the
system automatically changes from the outside
air circulation mode to the recirculation mode.

When the “

” button is pushed, the out-

side odor and exhaust gas detection sensor will
turn on.

When the Forest Air™ system is on, for the first
40 seconds, the recirculation mode is selected
to prevent dust, dirt and pollen from entering
the vehicle, and the system cleans the air inside
of the vehicle with Plasmacluster ion™ that are
emitted from the ventilator. After 40 seconds,
the outside odor and exhaust gas sensor acti-

vates and automatically alternates between the
recirculation mode and outside air circulation
mode.

●

The outside odor and exhaust gas detection
sensor detects industry odors such as pulp
or chemicals, and exhaust gas such as gaso-
line or diesel.

Inside Air Quality sensor :

This vehicle is equipped with an inside air
quality sensor. When the sensor detects odor in
the cabin, the system increases the fan speed
automatically. When the Forest Air™ system is
on, the inside air quality sensor will turn on.
This function will activate approximately 5 min-
utes after the engine has been started.

●

The Outside/Inside Air Mix function will turn
off when the air recirculation and outside air
circulation modes are changed manually.
When the Outside/Inside Air Mix function is
not active, turn off and on the Forest Air™
system, the Outside/Inside Air Mix function
will activate again.

Auto humidity control :

The sensor installed on the upper side of the
windshield detects the temperature and humid-
ity of the passenger compartment and the sur-
face of the windshield, and controls the humid-
ity of the passenger compartment to not be

4-40

Monitor, climate, audio, phone and voice recognition systems

췽

—

—
03/02/10—pattie

墍