Инструкция для INFINITI M56 (2011)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

INDICATORS FOR OPERATION
1. Engine start operation indicator

This indicator appears when the selector lever
is in the P (Park) position.

This indicator means that the engine will start
by pushing the ignition switch with the brake
pedal depressed. You can start the engine
directly in any position.

2. Steering lock release malfunction
indicator

This indicator appears when the steering wheel
cannot be released from the LOCK position.

If this indicator appears, push the push-button
ignition switch while lightly turning the steering
wheel right and left.

3. NO KEY warning

This warning appears in either of the following
conditions.

No key inside the vehicle :

The warning appears when the door is closed
with the Intelligent Key left outside the vehicle
and the ignition switch in the ACC or ON
position. Make sure that the Intelligent Key is
inside the vehicle.

Unregistered Intelligent Key :

The warning appears when the ignition switch
is pushed from the LOCK position and the
Intelligent Key cannot be recognized by the
system. You cannot start the engine with an
unregistered key. Use the registered Intelligent
Key.

See “INTELLIGENT KEY SYSTEM” in the “3. Pre-
driving checks and adjustments” section for
more details.

4. SHIFT “P” warning

This warning appears when the ignition switch
is pushed to stop the engine with the selector
lever in any position except the P (Park) posi-
tion.

If this warning appears, move the selector lever
to the P (Park) position or push the ignition
switch to the ON position.

An inside warning chime will also sound. (See
“INTELLIGENT KEY SYSTEM” in the “3. Pre-
driving checks and adjustments” section.)

5. “PUSH” warning

This warning appears when the selector lever is
moved to the P (Park) position with the ignition
switch in the ACC position after the SHIFT “P”
warning appears.

To push the ignition switch to the OFF position,
perform the following procedure:

SHIFT “P” warning

→

(Move the selector lever

to “P”)

→

PUSH warning

→

(Push the ignition

switch

→

ignition switch position is turned to

ON)

→

PUSH warning

→

(Push the ignition

switch

→

ignition switch position is turned to

OFF)

6. Intelligent Key battery discharge
indicator

This indicator appears when the Intelligent Key
battery is running out of power.

If this indicator appears, replace the battery
with a new one. (See “INTELLIGENT KEY BATTERY
REPLACEMENT” in the “8. Maintenance and
do-it-yourself” section.)

7. Engine start operation for
Intelligent Key system indicator

This indicator appears when the Intelligent Key
battery is running out of power and when the
Intelligent Key System and vehicle are not
communicating normally.

If this indicator appears, touch the ignition
switch with the Intelligent Key while depressing
the brake pedal. (See “INTELLIGENT KEY BAT-
TERY DISCHARGE” in the “5. Starting and driv-
ing” section.)

Instruments and controls

2-21

췽

—

—
01/12/10—pattie

墍