![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-470.png)
6. Insert a flat-blade screwdriver into the
grommet hole to add 90° turn onto the
part
䊊
E
.
Mark the center of the hole
䊊
F
on both sides
with a felt-tip pen. Remove the bracket from the
bumper, and then open 0.79 in (20 mm) diam-
eter holes on the bumper using the marks
䊊
F
as
a center.
7. Insert a J-nut into the license plate bracket
before placing the license plate bracket
on the fascia.
8. Install the license plate bracket with
screws.
9. Install the license plate with bolts that are
no longer than 0.55 in (14 mm).
WARNING
●
It is extremely dangerous to ride in a
cargo area inside the vehicle. In a col-
lision, people riding in these areas
are more likely to be seriously injured
or killed.
●
Do not allow people to ride in any area
of vehicle that is not equipped with
seats and seat belts.
●
Be sure everyone in your vehicle is in
a seat and using a seat belt properly.
TERMS
It is important to familiarize yourself
with the following terms before loading
your vehicle:
●
Curb Weight (actual weight of your
vehicle) - vehicle weight including:
standard and optional equipment, flu-
ids, emergency tools, and spare tire
assembly. This weight
does not
include
passengers and cargo.
STI0723
VEHICLE LOADING INFORMATION
Technical and consumer information
9-15
췽
—
—
01/13/10—pattie
墍