Инструкция для INFINITI M56 (2011)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

DISTANCE CONTROL ASSIST
OPERATION

Always pay attention to the operation of the
vehicle and be ready to manually decelerate to
maintain the proper following distance. The
Distance Control Assist (DCA) system may not
be able to decelerate the vehicle under some
circumstances.

The DCA system uses a sensor

䊊

located on

the front of the vehicle to detect vehicles trav-
eling ahead. The sensor generally detects the
signals returned from the reflectors on a vehicle
ahead. Therefore, if the sensor cannot detect
the reflector on the vehicle ahead, the DCA
system may not operate.

The following are some conditions in which the
sensor cannot detect the signals:

●

When the reflector of the vehicle ahead is
positioned high on the vehicle (trailer, etc.)

●

When the reflector on the vehicle ahead is
missing, damaged or covered

●

When the reflector of the vehicle ahead is
covered with dirt, snow and road spray

●

When the snow or road spray from traveling
vehicles reduces the sensor’s visibility

●

When dense exhaust or other smoke (black
smoke) from vehicles reduces the sensor’s
visibility

●

When excessively heavy baggage is loaded
in the rear seat or the luggage room of your
vehicle

The DCA system is designed to automatically
check the sensor’s operation. When the sensor
is covered with dirt or is obstructed, the system
will automatically be canceled. If the sensor is
covered with ice, a transparent or translucent
vinyl bag, etc., the DCA system may not detect
them. In these instances, the Distance Control
Assist (DCA) system may not be able to decel-
erate the vehicle properly. Be sure to check and
clean the sensor regularly.

The DCA system is designed to help assist the
driver to maintain a following distance from the
vehicle ahead. The system will decelerate as
necessary and if the vehicle ahead comes to a
stop, the vehicle decelerates to a standstill.
However, the DCA system can only apply up to
25% of the vehicles total braking power. If a
vehicle moves into the traveling lane ahead or if
a vehicle traveling ahead rapidly decelerates,
the distance between vehicles may become
closer because the DCA system cannot deceler-
ate the vehicle quickly enough. If this occurs,
the DCA system will sound a warning chime and
blink the system display to notify the driver to
take necessary action.

See “Approach warning” later in this section.

This system only brakes and moves the accel-
erator pedal upward to help assist the driver to
maintain a following distance from the vehicle
ahead. Acceleration should be operated by the
driver.

The DCA system does not control vehicle speed
or warn you when you approach stationary and
slow moving vehicles. You must pay attention to
vehicle operation to maintain proper distance
from vehicles ahead.

SSD0943

5-64

Starting and driving

췽

—

—
01/12/10—pattie

墍