BASIC COPY MODES

- 47 -

1

2

3

4

5

6

Enlargement and Reduction 

Copying

You can change the reproduction ratio of copied images in the 
following procedures:

Automatic Magnification Selection (AMS):

You need to specify the copy paper size in advance. Then this 
equipment will detect the original size and automatically select 
the optimal reproduction ratio for the copy paper size.

Specifying both original size and copy paper size 

separately:

You need to specify both the original size and the copy paper 
size separately in advance. According to the sizes you 
specified, the optimal reproduction ratio is selected 
automatically. This feature is used when Automatic 
Magnification Selection is not available, such as when copying 
OHP film originals.

Specifying reproduction ratio manually:

You can select the desired reproduction ratio by pressing 
[ZOOM] or one-touch zoom buttons on the touch panel.

Memo

• The available range of reproduction ratio differs depending 

on whether the original is placed on the original glass or on 
the RADF (Reversing Automatic Document Feeder).

Original glass: 25 to 400%
RADF: 25 to 200%

Automatic Magnification Selection 
(AMS)

When using the RADF (Reversing Automatic Document 
Feeder), specify the copy paper size in advance so that this 
equipment will detect the original size and automatically select 
the optimal reproduction ratio to the copy paper size.
This function is available when the size of the originals is as 
follows:
Other than North America: A4, A5, B5, FOLIO
North America: Letter, Legal

Note

• This function does not work properly when copying on the 

original glass or using the originals below. Select other 
methods when copying them.

• Highly transparent originals (e.g. OHP film, tracing paper)
• Totally dark originals or ones with dark borders
• Non-standard size originals (e.g. newspapers, magazines)

1

Place paper in the tray(s).

2

Press [ZOOM] on the touch panel.

3

Select the desired paper size, press [AMS] 
and then [OK].

Memo

• If you want to select a paper size other than the 

following, you need to register the size as “OTHER”. 
Once you register this size, it will be specified every 
time you press [OTHER] on the touch panel. 
Other than North America: A4, A5, B5
North America: Letter, Legal
For how to register, see the following page:



P.48 "Registering paper sizes to “OTHER” size"

• Paper sizes can also be registered by pressing the 

desired tray button of the equipment status indication 
area on the BASIC menu.

4

Place the original(s).

If the original is placed on the original glass, the 
reproduction ratio is set when the original is placed. If the 
original is placed on the RADF, the reproduction ratio is 
set when the original is scanned. 

5

Select other copy modes as required, and 
then press the [START] button on the 
control panel.