1
2
3
4
5
6
SENDING/RECEIVING A FAX
- 58 -
●
SENDING/RECEIVING A FAX
Note
Initializing the FAX is required to use the FAX for the first time.
For details, refer to the
Advanced Guide
.
Sending a Fax
Basic procedures
This section describes the basic procedures to send a fax. For
details of in-depth operations, see the page under each
procedure as required.
Besides the basic sending functions described in this page,
there are various useful ways to send a fax. These procedures
are described in the following pages.
Advanced Guide
1
Place the original(s).
Check the original size and scanning range, etc. Place
the original(s) on the original glass or RADF (Reversing
Automatic Document Feeder) in the correct direction.
(The illustration above shows the original placed on the
original glass.)
2
Press the [FAX] button on the control panel.
The fax screen is displayed. If you leave the screen
unattended for the period of the auto clear setting time
(45 sec. by manufacturer default), the screen returns to
the default one automatically.
3
Press [OPTION] and set the transmission
conditions.
The transmission condition setting screen is displayed.
Set the transmission conditions such as resolution,
original mode, exposure and transmission mode, as
required.
P.62 "Setting the transmission conditions"
4
Specify the recipient.
To specify the recipient, dial the number using the digital
keys on the control panel or use the address book.
