SENDING/RECEIVING A FAX
- 67 -
1
2
3
4
5
6
Confirming the recipients
You can confirm the recipients which you specified or delete
unnecessary recipients.
1
Press [DESTINATION].
2
The recipient list screen is displayed.
Select the recipient you want to delete, and
then press [DELETE].
• Press
or
to switch the pages.
• Press [CLOSE] to return to the previous screen.
Other transmissions
On-hook transmission
In this mode, you can dial and perform direct fax transmission
without picking up the handset of the external telephone. On-
hook Transmission is available when
on the upper right of
the screen is OFF.
1
Place the original(s).
2
Press the [FAX] button on the control panel.
3
Press [OPTION] and set the transmission
conditions.
P.62 "Setting the transmission conditions"
4
Press [MONITOR].
• Make sure that you hear the dial tone from the built-in
speaker.
• To cancel the operation, press [MONITOR] again.
Note
• To use the [SEARCH] to specify the recipients, you
must specify the recipient in advance by following the
procedures below. Specify the recipients, and then
press [MONITOR].
5
Specify the recipients.
P.64 "Specifying the recipient"
Note
• For direct entry, each press of a digital key on the
control panel dials a number. If you make a mistake
when dialing the fax number, press [MONITOR] to cut
the line, and then press it again to redial.
• If you specified the recipient with the [SEARCH], press
[MONITOR], and then [DIAL].
6
When you hear the answer tone (short high-
pitched tone) through the built-in speaker
indicating the connection has been made
with the recipient’s machine, press [SEND].
Note
• When you hear the other party’s voice answering the
call before pressing [SEND], pick up the handset of the
external telephone. Then ask him/her to perform
operation of the fax reception.
Off-hook transmission
In this mode, you can pick up the handset of the external
telephone to dial and perform direct fax transmission. Off-hook
Transmission is available when
on the upper right of the
screen is OFF.
1
Place the original(s).
2
Press the [FAX] button on the control panel.
