Инструкция для ZYXEL ZyWALL 110

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 7 Interfaces

ZyWALL 110/310/1100 Series User’s Guide

117

Address

This field displays the combined IPv6 IP address for this interface.

Note: This field displays the combined address after you click

and reopen this

screen.

DHCPv6 Setting

DUID

This field displays the DHCP Unique IDentifier (DUID) of the interface, which is unique
and used for identification purposes when the interface is exchanging DHCPv6
messages with others. See

DHCPv6 on page 107

for more information.

DUID as MAC

Select this if you want the DUID is generated from the interface’s default MAC address.

Customized

DUID

If you want to use a customized DUID, enter it here for the interface.

Enable Rapid

Commit

Select this to shorten the DHCPv6 message exchange process from four to two steps.
This function helps reduce heavy network traffic load.

Note: Make sure you also enable this option in the DHCPv6 clients to make rapid commit

work.

Information

Refresh Time

Enter the number of seconds a DHCPv6 client should wait before refreshing information
retrieved from DHCPv6.

Request Address This field is available if you set this interface to DHCPv6 Client. Select this to get an

IPv6 IP address for this interface from the DHCP server. Clear this to not get any IP
address information through DHCPv6.

DHCPv6 Request

Options /

DHCPv6 Lease

Options

If this interface is a DHCPv6 client, use this section to configure DHCPv6 request
settings that determine what additional information to get from the DHCPv6 server. If
the interface is a DHCPv6 server, use this section to configure DHCPv6 lease settings
that determine what additional information to offer to the DHCPv6 clients.

Add

Click this to create an entry in this table. See

Section 7.3.3 on page 123

for more

information.

Remove

Select an entry and click this to delete it from this table.

Object

Reference

Select an entry and click Object Reference to open a screen that shows which
settings use the entry. See

Section 7.3.2 on page 122

for an example.

This field is a sequential value, and it is not associated with any entry.

Name

This field displays the name of the DHCPv6 request or lease object.

Type

This field displays the type of the object.

Value

This field displays the IPv6 prefix that the ZyWALL obtained from an uplink router
(Server is selected) or will advertise to its clients (Client is selected).

Interface

When Relay is selected, select this check box and an interface from the drop-down list
if you want to use it as the relay server.

Relay Server

When Relay is selected, select this check box and enter the IP address of a DHCPv6
server as the relay server.

IPv6 Router
Advertisement
Setting

Enable Router

Select this to enable this interface to send router advertisement messages periodically.
See

IPv6 Router Advertisement on page 107

for more information.

Advertised Hosts

Get Network

Configuration