Chapter 4 Quick Setup Wizards
ZyWALL 110/310/1100 Series User’s Guide
57
4.3.10 VPN Advanced Wizard - Summary
This is a read-only summary of the VPN tunnel settings.
Figure 39
VPN Advanced Wizard: Step 5
• Rule Name: Identifies the VPN connection (and the VPN gateway).
• Secure Gateway: IP address or domain name of the remote IPSec device.
• Pre-Shared Key: VPN tunnel password.
• Certificate: The certificate the ZyWALL uses to identify itself when setting up the VPN tunnel.
• Local Policy: IP address and subnet mask of the computers on the network behind your ZyWALL
that can use the tunnel.
• Remote Policy: IP address and subnet mask of the computers on the network behind the
remote IPSec device that can use the tunnel.
• Copy and paste the Configuration for Remote Gateway commands into another ZLD-based
ZyWALL’s command line interface.
• Click Save to save the VPN rule.
4.3.11 VPN Advanced Wizard - Finish
Now the rule is configured on the ZyWALL. The Phase 1 rule settings appear in the VPN > IPSec
VPN > VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec VPN >
VPN Connection screen.