Инструкция для ZYXEL ZyWALL 110

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 6 Monitor

ZyWALL 110/310/1100 Series User’s Guide

Status

The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.

Zone

This field displays the zone to which the interface is assigned.

IP Address

This is the IP address of the interface. If the interface is active (and connected), the
ZyWALL tunnels local traffic sent to this IP address to the Remote Gateway Address.

My Address

This is the interface or IP address uses to identify itself to the remote gateway. The
ZyWALL uses this as the source for the packets it tunnels to the remote gateway.

Remote Gateway
Address

This is the IP address or domain name of the remote gateway to which this interface
tunnels traffic.

Mode

This field displays the tunnel mode that you are using.

Action

This field lists which services the interface provides to the network. This field displays n/a
if the interface does not provide any services to the network.

IPv6 Interface
Status

This section displays the status of the IPv6 interface. If an Ethernet interface does not
have any physical ports associated with it, its entry is displayed in light gray text.

Expand/Close

Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.

Name

This field displays the name of each interface. If there is an Expand icon (plus-sign) next
to the name, click this to look at the status of virtual interfaces on top of this interface.

Port

This field displays the physical port number.

Status

This field displays the current status of each interface. The possible values depend on what
type of interface it is.

For Ethernet interfaces:

Inactive - The Ethernet interface is disabled.

Down - The Ethernet interface is enabled but not connected.

Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the
port speed and duplex setting (Full or Half).

For cellular (3G) interfaces, see

Section 6.9 on page 93

the Web Help for the status that

can appear.