Chapter 37 System
ZyWALL 110/310/1100 Series User’s Guide
483
37.12 Language Screen
Click Configuration > System > Language to open the following screen. Use this screen to
select a display language for the ZyWALL’s Web Configurator screens.
Figure 334
Configuration > System > Language
The following table describes the labels in this screen.
37.13 IPv6 Screen
Click Configuration > System > IPv6 to open the following screen. Use this screen to enable
IPv6 support for the ZyWALL’s Web Configurator screens. See the
more information about IPv6.
#
This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL’s (non-configurable) default
policy. The ZyWALL applies this to traffic that does not match any other configured rule. It
is not an editable rule. To apply other behavior, configure a rule that traffic will match so
the ZyWALL will not have to use the default policy.
Zone
This is the zone on the ZyWALL the user is allowed or denied to access.
Address
This is the object name of the IP address(es) with which the computer is allowed or denied
to access.
Action
This displays whether the computer with the IP address specified above can access the
ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to return the screen to its last-saved settings.
Table 191
Configuration > System > SNMP (continued)
LABEL
DESCRIPTION
Table 192
Configuration > System > Language
LABEL
DESCRIPTION
Language Setting
Select a display language for the ZyWALL’s Web Configurator screens. You also need
to open a new browser session to display the screens in the new language.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to return the screen to its last-saved settings.