ZyWALL 110/310/1100 Series User’s Guide
443
C
H A P T E R
3 7
System
37.1 Overview
Use the system screens to configure general ZyWALL settings.
37.1.1 What You Can Do in this Chapter
• Use the System > Host Name screen (see
) to configure a unique
name for the ZyWALL in your network.
• Use the System > USB Storage screen (see
) to configure the
settings for the connected USB devices.
• Use the System > Date/Time screen (see
) to configure the date and
time for the ZyWALL.
• Use the System > Console Speed screen (see
) to configure the
console port speed when you connect to the ZyWALL via the console port using a terminal
emulation program.
• Use the System > DNS screen (see
) to configure the DNS (Domain
Name System) server used for mapping a domain name to its corresponding IP address and vice
versa.
• Use the System > WWW screens (see
) to configure settings for HTTP
or HTTPS access to the ZyWALL and how the login and access user screens look.
• Use the System > SSH screen (see
) to configure SSH (Secure SHell)
used to securely access the ZyWALL’s command line interface. You can specify which zones allow
SSH access and from which IP address the access can come.
• Use the System > TELNET screen (see
) to configure Telnet to access
the ZyWALL’s command line interface. Specify which zones allow Telnet access and from which IP
address the access can come.
• Use the System > FTP screen (see
) to specify from which zones FTP
can be used to access the ZyWALL. You can also specify from which IP addresses the access can
come. You can upload and download the ZyWALL’s firmware and configuration files using FTP.
Please also see
for more information about firmware and configuration
files.
• Your ZyWALL can act as an SNMP agent, which allows a manager station to manage and monitor
the ZyWALL through the network. Use the System > SNMP screen (see
) to configure SNMP settings, including from which zones SNMP can be used to access the
ZyWALL. You can also specify from which IP addresses the access can come.
• Use the System > Language screen (see
) to set a language for the
ZyWALL’s Web Configurator screens.
• Use the System > IPv6 screen (see
) to enable or disable IPv6
support on the ZyWALL.
Note: See each section for related background information and term definitions.