Chapter 10 Routing Protocols
ZyWALL 110/310/1100 Series User’s Guide
206
10.3.2 OSPF Area Add/Edit Screen
The OSPF Area Add/Edit screen allows you to create a new area or edit an existing one. To access
this screen, go to the OSPF summary screen (see
), and click either the
Add icon or an Edit icon.
Figure 119
Configuration > Network > Routing > OSPF > Add
Add
Click this to create a new OSPF area.
Edit
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
Remove
To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so.
#
This field is a sequential value, and it is not associated with a specific area.
Area
This field displays the 32-bit ID for each area in IP address format.
Type
This field displays the type of area. This type is different from the Type field above.
Authentication
This field displays the default authentication method in the area.
Apply
Click this button to save your changes to the ZyWALL.
Reset
Click this button to return the screen to its last-saved settings.
Table 75
Configuration > Network > Routing Protocol > OSPF (continued)
LABEL
DESCRIPTION