Инструкция для ZYXEL ZyWALL 110

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 41 Packet Flow Explore

ZyWALL 110/310/1100 Series User’s Guide

521

The following table describes the labels in this screen.

Table 211

Maintenance > Packet Flow Explore > Routing Status

LABEL

DESCRIPTION

Routing Flow

This section shows you the flow of how the ZyWALL determines where to route a packet.
Click a function box to display the related settings in the Routing Table section.

Routing Table

This section shows the corresponding settings according to the function box you click in the
Routing Flow section.

The following fields are available if you click Direct Route, Static-Dynamic Route, or Main Route in the
Routing Flow section.

This field is a sequential value, and it is not associated with any entry.

Destination

This is the destination IP address of a route.

Gateway

This is the IP address of the next-hop gateway or the interface through which the traffic is
routed.

Interface

This is the name of an interface associated with the route.

Metric

This is the route’s priority among the displayed routes.

Flags

This indicates additional information for the route. The possible flags are:

•

A - this route is currently activated

•

S - this is a static route

•

C - this is a direct connected route

•

O - this is a dynamic route learned through OSPF

•

R - this is a dynamic route learned through RIP

•

G - the route is to a gateway (router) in the same network.

•

! - this is a route which forces a route lookup to fail.

•

B - this is a route which discards packets.

•

L - this is a recursive route.

Persist

This is the remaining time of a dynamically learned route. The ZyWALL removes the route
after this time period is counted down to zero.

The following fields are available if you click Policy Route in the Routing Flow section.

This field is a sequential value, and it is not associated with any entry.

PR #

This is the number of an activated policy route. If you have configured a schedule for the
route, this screen only displays the route at the scheduled time.

Incoming

This is the interface on which the packets are received.

Source

This is the source IP address(es) from which the packets are sent.

Destination

This is the destination IP address(es) to which the packets are transmitted.

Service

This is the name of the service object. any means all services.

DSCP Code

This is the DSCP value of incoming packets to which this policy route applies. See

Section

9.2 on page 189