Инструкция для ZYXEL ZyWALL 110

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 7 Interfaces

ZyWALL 110/310/1100 Series User’s Guide

122

7.3.2 Object References

When a configuration screen includes an Object Reference icon, select a configuration object and
click Object Reference to open the Object References screen. This screen displays which
configuration settings reference the selected object. The fields shown vary with the type of object.

Authentication

Select an authentication method, or disable authentication. To exchange OSPF routing
information with peer border routers, you must use the same authentication method
that they use. Choices are:

Same-as-Area - use the default authentication method in the area

None - disable authentication

Text - authenticate OSPF routing information using a plain-text password

MD5 - authenticate OSPF routing information using MD5 encryption

Text

Authentication

Key

This field is available if the Authentication is Text. Type the password for text
authentication. The key can consist of alphanumeric characters and the underscore,
and it can be up to 16 characters long.

MD5

Authentication

This field is available if the Authentication is MD5. Type the ID for MD5
authentication. The ID can be between 1 and 255.

MD5

Authentication

Key

This field is available if the Authentication is MD5. Type the password for MD5
authentication. The password can consist of alphanumeric characters and the
underscore, and it can be up to 16 characters long.

MAC Address
Setting

This section appears when Interface Properties is External or General. Have the
interface use either the factory assigned default MAC address, a manually specified
MAC address, or clone the MAC address of another device or computer.

Use Default MAC

Address

Select this option to have the interface use the factory assigned default MAC address.
By default, the ZyWALL uses the factory assigned MAC address to identify itself.

Overwrite

Default MAC

Address

Select this option to have the interface use a different MAC address. Either enter the
MAC address in the fields or click Clone by host and enter the IP address of the device
or computer whose MAC you are cloning. Once it is successfully configured, the
address will be copied to the configuration file. It will not change unless you change the
setting or upload a different configuration file.

Related Setting

Configure

PPPoE/PPTP

Click PPPoE/PPTP if this interface’s Internet connection uses PPPoE or PPTP.

Configure VLAN

Click VLAN if you want to configure a VLAN interface for this Ethernet interface.

Configure WAN

TRUNK

Click WAN TRUNK to go to a screen where you can set this interface to be part of a
WAN trunk for load balancing.

Configure Policy

Route

Click Policy Route to go to the policy route summary screen where you can manually
associate traffic with this interface.

You must manually configure a policy route to add routing and SNAT settings for an
interface with the Interface Type set to general. You can also configure a policy
route to override the default routing and SNAT behavior for an interface with an
Interface Type of internal or external.

Click OK to save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving.

Table 41

Configuration > Network > Interface > Ethernet > Edit (continued)

LABEL

DESCRIPTION