Chapter 16 IP/MAC Binding
ZyWALL 110/310/1100 Series User’s Guide
244
Figure 143
Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
16.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the
ZyWALL does not apply IP/MAC binding.
Figure 144
Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 90
Configuration > Network > IP/MAC Binding > Edit > Add
LABEL
DESCRIPTION
Interface Name
This field displays the name of the interface within the ZyWALL and the interface’s IP
address and subnet mask.
IP Address
Enter the IP address that the ZyWALL is to assign to a device with the entry’s MAC
address.
MAC Address
Enter the MAC address of the device to which the ZyWALL assigns the entry’s IP
address.
Description
Enter up to 64 printable ASCII characters to help identify the entry. For example, you
may want to list the computer’s owner.
OK
Click OK to save your changes back to the ZyWALL.
Cancel
Click Cancel to exit this screen without saving.
Table 91
Configuration > Network > IP/MAC Binding > Exempt List
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Click an entry or select it and click Edit to modify the entry’s settings.