Chapter 19 Firewall
ZyWALL 110/310/1100 Series User’s Guide
279
Now you configure a LAN1 to WAN firewall rule that allows IRC traffic from the IP address of the
CEO’s computer (192.168.1.7 for example) to go to any destination address. You do not need to
specify a schedule since you want the firewall rule to always be in effect. The following figure shows
the results of your two custom rules.
Figure 173
Limited LAN to WAN IRC Traffic Example
Your firewall would have the following configuration.
• The first row allows the LAN1 computer at IP address 192.168.1.7 to access the IRC service on
the WAN.
• The second row blocks LAN1 access to the IRC service on the WAN.
• The third row is the firewall’s default policy of allowing all traffic from the LAN1 to go to the WAN.
Alternatively, you configure a LAN1 to WAN rule with the CEO’s user name (say CEO) to allow IRC
traffic from any source IP address to go to any destination address.
Your firewall would have the following configuration.
• The first row allows any LAN1 computer to access the IRC service on the WAN by logging into the
ZyWALL with the CEO’s user name.
• The second row blocks LAN1 access to the IRC service on the WAN.
• The third row is the firewall’s default policy of allowing all traffic from the LAN1 to go to the WAN.
Table 103
Limited LAN1 to WAN IRC Traffic Example 1
#
USER
SOURCE
DESTINATION
SCHEDULE
SERVICE
ACTION
1
Any
192.168.1.7
Any
Any
IRC
Allow
2
Any
Any
Any
Any
IRC
Deny
3
Any
Any
Any
Any
Any
Allow
Table 104
Limited LAN1 to WAN IRC Traffic Example 2
#
USER
SOURCE
DESTINATION
SCHEDULE
SERVICE
ACTION
1
CEO
Any
Any
Any
IRC
Allow
2
Any
Any
Any
Any
IRC
Deny
3
Any
Any
Any
Any
Any
Allow
LAN1