Appendix B: MIDI
B•6
FS1 with MIDI Assignment
FS1 with no MIDI Assignment
•
MIDI Channel (Knob 1):
Select the MIDI Channel on which the selected control
will transmit its MIDI command.
•
None:
Send no MIDI data. (Note that you won’t see Knob 2 - 4 options appear
until you select an option other than “None.”)
•
01 - 16:
Choose the MIDI Channel on which to transmit the selected control’s
messages.
•
Base:
Sets the control to follow the current “system” MIDI Channel, as set in the
device Setup (see
“Page 6, MIDI/Tempo Options” on page 2•10
). This is a handy
feature to have any Presets’ MIDI Controls set to “Base” to dynamically follow the
common Setup -MIDI Channel value.
•
Message Type (Knob 2):
Select the type of MIDI message sent by the selected
control.
•
FS1
-
FS8
,
LOOPER
,
TAP
and
EXP TOE SWITCH
footswitches can each be
assigned to send MIDI CC, CC Toggle, Program Change (fixed), Bank Change
(fixed) or Note On messages.
• The
EXP1
and
EXP2
pedal controls can be assigned to each send one MIDI CC
with a definable Value Range, which allows you to sweep a variable parameter on
your target device.
•
CC/Program/Bank # (Knob 3):
Selects further options, depending on the Message
Type selected (Knob 2).
•
CC #:
When the Message Type is “CC” or “CC Toggle,” this allows the choice
of any MIDI CC number from 000 to 127. If editing EXP1 or EXP2 controls,
this knob sets the Minimum CC value for the pedal. (Also see the Knob 4 Value
description.)
•
Program #:
When the Message Type is “Program Change,” this allows the choice
of a fixed Program Value of 000 to 127.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
