![background image](/i/line-6/140898/line-6-pod-hd500/h/line-6-pod-hd500-012.png)
System Setup
2•2
Page 1, Setup:Utilities Options
The top portion of the screen lists the
Flash Memory
and
USB Firmware
versions currently
installed on your POD HD500 device. The lower portion of the screen offers four options,
adjustable using the Multi-function Knobs 1 - 4.
•
Footswitch Mode (Knob 1):
Configures the function of POD HD500 footswitches
FS5
through
FS8
for either “Pedalboard Mode” or “Preset Mode” (see
Channel Footswitches” on page 4•5
Note that you can reference all current footswitch assignments in the Performance View
screen, which will change its display according to the Footswitch Mode you choose here.
See
“FX & Amp Block Footswitch Assignment” on page 3•10
•
Amp Knobs Display (Knob 2):
When set to “On,” allows the LCD screen to
momentarily display the actual Amp Tone Knob values whenever adjusting any
physical amp knob. This setting is global.
•
Looper FS Display (Knob 3):
When the
LOOPER
footswitch is toggled On to engage
Looper Mode, the Performance View screen automatically changes to display Looper
footswitch functions (see
). This setting is global. The two selections here
offer the following behaviors when Looper Mode is
active
:
•
All Views:
Shows the Looper controls in the LCD regardless of the currently
selected View.
•
Performance View:
Shows the Looper screen as the Performance View screen
(and allows the 3 Home View screens to still be displayed when toggling the
VIEW
button).