![background image](/i/line-6/140898/line-6-pod-hd500/h/line-6-pod-hd500-008.png)
Overview
1•4
•
Reference (Knob 1):
If you’d like to tune to a reference other than standard 440Hz,
select from 425 to 455Hz.
•
Audio (Knob 2):
Select
Mute
to silence POD HD500 output while tuning, or select
Bypass
to hear your guitar dry.
Press the
TAP
switch, or any other footswitch, to exit Tuner Mode.
Tap Tempo
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
SAVE
HOLD FOR SYSTEM & I/O
VIEW
PRESETS
Tap Tempo is the term we use to refer to the “System Tempo” value that is accessed
via the
TAP
button on your POD HD500 device. Stomp rhythmically to set your
Tap Tempo. Alternatively, you can set a numerical Tempo value within Setup (see
“Page 6, MIDI/Tempo Options” on page 2•10
). This setting is saved per Preset.
You’ll see the LED on the
TAP
switch blink to indicate your current Tap Tempo BPM.
Tempo-based FX (Modulation, Filter & Delay FX) that offer a
Tempo Sync
parameter can
optionally be set to a note division of this Tap Tempo value.
Connections
USB
PHONES
AUX IN
L/MONO
RIGHT
TRS STEREO
FX RETURN
LEFT
RIGHT
BALANCED OUTPUT
L/MONO
R/MONO
UNBALANCED OUTPUT
FX SEND
OUT/THRU
INPUT
MIDI
OUT
S/PDIF
POWER
GUITAR IN
PEDAL 2
LINE
STOMP
MIC LEVEL
CD/MP3
INPUT
L6 LINK
VARIAX
MIC
9VDC 2.5A Min
CONNECT TO L6 LINK ONLY
Please refer to your
POD HD500 Pilot’s Guide for descriptions of the rear panel
connections. You’ll find more details on their specific uses within the following chapters
as well!