![background image](/i/line-6/140898/line-6-pod-hd500/h/line-6-pod-hd500-092.png)
Using the Looper
8•4
PLAY/STOP -
Press the
FS6
switch to toggle Play/Stop for your recorded Loop. If you are
actively recording a Loop, press this switch to stop recording set your Loop “out” point.
The
FS6
switch remains lit whenever playback is active.
•
While playback is active, the Play/Stop icon appears as “STOP.”
1/2 SPEED -
Press the
FS7
switch to toggle the 1/2 Speed feature On/Off. The
FS7
switch
remains lit whenever 1/2 Speed is active.
Note that you can use the 1/2 Speed option for recording as well as playback. Specific
behaviors apply to each - please see
“1/2 Speed Operation” on page 8•5
•
When 1/2 Speed is active, the Speed icon appears as “FULL.”
•
When 1/2 Speed is Off, the Speed icon appears as “1/2.”
REVERSE -
Press the
FS8
switch to toggle the Reverse Play feature On/Off. All Loop
playback is backwards when on. The
FS8
switch remains lit whenever Reverse is active.
•
When Reverse is active, the Reverse icon appears as “FWD.”
•
When Reverse is Off, the Reverse icon appears as “REV.”