![background image](/i/line-6/140898/line-6-pod-hd500/h/line-6-pod-hd500-020.png)
System Setup
2•10
Page 6, MIDI/Tempo Options
•
MIDI Channel (Knob 1):
Sets the “System” MIDI Channel that POD HD500
utilizes for both receiving and sending MIDI communication via the MIDI DIN
Input/Output. Choose any individual Channel 1 - 16, or “Omni” for all Channels.*
This is a global setting.
*Note: The MIDI Channel selected here also affects the MIDI Channel settings utilized by
L6 LINK - see
“Page 10, Setup: L6 LINK Control” on page 2•17
•
MIDI Out/Thru (Knob 2):
Allows the MIDI Out DIN to be switched between a
MIDI Output versus MIDI Output + Thru.
•
Tempo Sync (Knob 3):
The “Speed” or “Time” parameters of all tempo-based FX
(Modulation, Pitch & Delays) can optionally be set to a note value to follow the
(Knob 4) Tempo BPM value. This Tempo Sync option is a global setting that allows
you to choose whether the FX follow the Tap Tempo as a per-Preset value or globally.
•
Preset:
Tempo settings are saved and recalled on a per Preset basis.
•
Global:
Tempo information stored within any Preset is ignored. When saving a
Preset while this option is set to “Global,” the current tempo value will be saved
with the Preset.
•
Tempo (Knob 4):
Enter in a specific “Tap Tempo” for your current Preset (as opposed
to stomping rhythmically on the
TAP
footswitch). This value is saved individually
per Preset.