![background image](/i/line-6/140898/line-6-pod-hd500/h/line-6-pod-hd500-061.png)
Amp, Cab & Mic Models
6•5
*Note that, whether an Amp or Preamp is selected, the additional application of Cab and
Mic Models is dependent upon the SETUP:OUTPUT settings. Please see
The overall volume levels among the different Preamp Models varies - this is normal. The
Preamp sections of each of the classic amplifiers we modeled are indeed quite different,
and we’ve set the Preamps’ default values to best match the type of power amp into which
they are intended to fed. Tweak the
DRIVE
and
VOLUME
knobs to optimize the level for
your specific needs!
Amp Block States
The Amp Blocks have 3 available states: On, Off (bypassed) or Disabled (sometimes
referred to as a “Null” state for the Block).
Amp Block “On”
Amp Block “Off”
Amp Block “Disabled” (Null Block)
About Default Amp Settings
Whenever you change to a different Amp or Preamp Model, predetermined Cab &
Mic models are automatically loaded, as well as Amp Tone Knob settings designed to
complement the Amp type. As noted throughout this chapter, you can certainly switch to
a different Cab and/or Mic Model - just be sure to save your Preset to retain these changes.