- 8
AV2 Connection
You can connect the following devices to the AV2 DECODER connection on the
back of the recorder:
Decoder Connect a Pay-TV or Canal+ decoder.
Other Device Connect a video recorder or similar device.
OK
OK
Auto Programming
Program Edit
Clock set
TV Aspect
AV2 Connection
Video output format
Power Save Mode
Factory Set
Decoder
Other Device
Prev.
Select
Move
Video output format
Select the video output format depending on which video interface you are
using (page 16):
YPbPr
The TV set is connected to the COMPONENT VIDEO OUT socket.
RGB
The TV set is connected to the Scart socket AV1 AUDIO/VIDEO.
Power Save Mode
You can set the recorder so that it consumes < 1 Watt on standby. In the On position,
the decoder signal is switched from AV to AV1 and the display switched off.
Factory Set
You can reset the recorder to its factory settings if necessary. Select Set and press
OK. The Auto Setup menu appears (page 1).
➠
Some options cannot be reset with this (security stage, password, country
code, station list, timer list).
Language Menu
Menu language
Select a language for the menus and dialogues displayed by the recorder.
Call menu.
5
6
Select symbol
Language.
4
Call second level.
5
6
Select Display Menu.
4
Call third level.
5
6
Select English.
Confirm with OK.
OK
OK
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
English
Deutsch
Français
Italiano
Español
Nederlands
Svenska
Prev.
Select
Move
Disc languages
Select a language for the disc‘s menu, audio and subtitles.
OK
OK
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
Original
English
French
German
Italian
Portuguese
Russian
Spanish
Others ----
Prev.
Select
Move
If another language is to be used as the “original” version of the disc, select this
here if it is available on the Disc.
Original The original language of the disc is selected.
Others Select other language with Other and confirm with OK. Enter
the corresponding four-digit number from the “language code
list” on page 6 and confirm with OK.
Off Switch off disc subtitles.
Initial Installation
