9 -  

Audio Menu

Each DVD disc offers a variety of audio formats. Set the audio format for the 
recorder according to the type of audio system you are using.

Dolby Digital / DTS / MPEG

PCM  Select this option if the unit is connected to a digital two 

channel stereo amplifier. The DVD recorder‘s digital audio 
outputs emit sound in PCM  channel format if you play a 
DVD-Video disc with Dolby Digital audio format.

Bitstream   Select “Bitstream“ if you have a Dolby Digital decoder (or 

amplifier, a Loewe TV with AC3 or DIS module or another unit 
with Dolby Digital decoder) connected to the DIGITAL AUDIO 
socket of the DVD recorder.

OFF

If you select “Off“ the DTS signal is not emitted from the 
DIGITAL AUDIO socket. 

Sampling Frequency

If your receiver or amplifier is NOT designed for 96 kHz signals, select 48 kHz. If 
you have made this selection, the unit automatically converts the 96 kHz signals to 
48 kHz signals that the system can decode. If your receiver or amplifier is designed 
for 96 kHz signals, select 96 kHz.

Night Mode

Thanks to digital audio technology the DVD format enables you to hear soundtracks 
in the most accurate and realistic way possible. However, you may wish to limit 
the dynamics (i.e. the difference between the loudest and the quietest sounds). In 
this way you can play a film with minimum volume differences. For this purpose 
switch DRC to ON.

OK

OK

Dolby Digital
DTS
MPEG
Sampling Freq.

DRC

Vocal

OFF
ON

3

 Prev.

 Select

Move

Karaoke Audio

Switch the singing option (Vocal) on, if you want to play a multi-channel karaoke 
DVD. The karaoke channels on the disc are mixed into normal stereo sound.

Lock Menu

Films on DVD can contain scenes that are not suitable for children. For this reason 
discs can contain child protection information that applies to the whole disc or only 
to certain scenes on the disc. The ratings are country-dependent. The child lock 
function enables you to prevent your children watching certain discs or scenes.

Set Password

Change the four-digit code.
 

Rating

Set Password

Area Code

Change
Löschen



 Prev.

0-9

 Input

New Password

OK

Call menu.

5

6 

Select symbol   Lock.

4

 Call second level. 

5

6 

Select Set Password.

4

 Call third level.

If you have not yet entered a password

Enter a four-digit number with number buttons.

Confirm with OK.

Enter password to check.

Confirm with OK.

If you have already entered a password

Select Change.

Confirm with OK.

Enter current password.

Confirm with OK.

Then enter a new four-digit password.

Confirm with OK.

Initial Installation