47 -  

Manual Record

Proceed as follows to make video recordings. 

Switch  on  the  recorder.  Insert  a  recordable  disc  for  DVD 
recordings. A new disc is initialised by the recorder (on request) 
when inserted (page 3). 

If required, select Rec Mode Set (page 31).

Switch the recorder input to the signal source you wish to record 
from with the number buttons, the P+ / P- buttons or the 0 AV 
button. The station number, name and current sound status are 
displayed on the screen.

Start  recording.  (REC  lights  up  in  the  display  window  of  the 
recorder). The recording starts immediately and continues until 
the disc is full or you interrupt the recording. Every additional 
pressing  of  the  button  prolongs  the  recording  time  by  10 
minutes.

00:08:21

0H 09M Rec.

DVD

During recording: Show remaining recording time. Every addi-
tional pressing of the button prolongs the recording time by 10 
minutes.

Interrupt recording. Press again to continue.

Show status of recording.

End recording.

➠

 If the recorder is disconnected from the mains during recording (or in case 

of a power failure) or the recording is interrupted manually with the On-Off 
button, the rest of the recording is lost.

Timer Recording

This recorder can be programmed to record up to 16 programs within one month. 
For  programmed  recordings  the  timer  must  be  informed  which  signal  sources 
(TV stations or from AV devices) are to be recorded and the respective start and 
stop time.

Switch on the recorder. Insert a rewritable disc for DVD recordings. 

Press twice to open the Timer Record menu.

OK

END

OK

Close

Timer Record List

REC-MENU

Timer Record

   88   min free

PR

Date

31

S23  K1

Start time End time

Mode

VPS/

PDC

8/12 Fr 20:15

22:00

SQ

Off

PR  Select the stations or an external input.

Date  Select the data up to one month in advance.

Start time  Defines the start time for the recording.

End time  Defines the end of the recording.

Mode  Set the recording quality if necessary (page 31).

VPS/PDC  The VPS/PDC system adapts the recording time automatically 

to changes in the program start time for recordings via the 
integrated tuner. Set the VPS/PDC time and the date of the 
program you want to record. You will find these in your TV 
guide or in the teletext.

Enter the necessary information for your timer recording(s).

3

4

 Move the cursor to the previous / next column.

5

6

 Edit the setting at the current cursor position.

OK saves timer data.

Exit Timer Record menu without saving.

Call Timer Record List menu.

Switch recorder to standby.

Recording