- 134 -
Cleaning
5
5.
Maintenance
3
Open the top cover (3).
CAUTION
Possible to get burned.
● Since the fuser unit gets hot, carry out the
operation carefully, and when lifting it up you
must hold it by the handle. Do not try to hold it
whilst it is hot. Wait until it has cooled down and
then carry out the operation.
3
4
Remove the print cartridge (4) and place
it on a flat surface.
Note
● The image drum (the green tube) of the print
cartridge is very delicate. Handle it carefully.
●
Do not expose the print cartridge to direct sunlight
or very bright interior light (approximately more than
1,500 lux). Even under the normal interior light, do
not leave it for more than 5 minutes.
4
5
Cover the removed print cartridge (4)
with paper so that it will not be exposed
to light.
4
6
Lightly wipe the lenses (5) of the LED
heads with soft tissue paper.
5
7
Return the print cartridge (4) into the
printer.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
