- 28 -

2

2.

Printing Basic Oper

ation

2. Printing Basic Operation

●

●

Turning On/Off the Power

Power Supply Conditions

The power supply must meet the following 

conditions:

Current: 

110–127 V AC 

(Range 99–140 V AC)

220–240 V AC 

(Range 198–264 V AC)

Frequency: 50/60 Hz ± 2%

Note

●

If the power supply is unstable, use a voltage regulator.

●

The maximum power consumption of this printer is 1400 

W. Ensure that the power supply is sufficient to operate 

this printer.

●

We do not guarantee operation where an uninterruptible 

power system (UPS) or inverter is used. Do not use an 

uninterruptible power system (UPS) or inverter.

WARNING

There is a risk of 

getting an electric 

shock and/or causing 

fire.

●

Be sure to turn off the power supply switch when 

attaching or removing the AC cable.

●

Be sure to plug in and unplug the AC cable while 

holding on to the power supply plug.

●

Insert the AC cable plug completely into the wall 

socket securely.

●

Do not touch the power cord, or printer, if your 

hands are wet.

●

Install a power cord in the place which is not 

stepped on, and do not place a thing on a power 

cord.

●

Do not use the cord tied in a bundle.

●

Please do not use the damaged power cord.

●

Do not use multi-outlet adapters.

●

Do not connect this printer and other electric 

products to the same wall socket. If it is 

connected simultaneously with an air conditioner, 

copier, shredder, etc., the printer may malfunction 

by the electric noise. When you connect with 

the same wall socket unavoidably, please use a 

commercial noise filter or a commercial noise cut 

transformer.

●

Use the power cord supplied to the printer and 

plug it directly into a wall socket. Do not use the 

power cord for other product for the printer.

●

Do not use an extension cord. When you use it 

unavoidably, use the thing more than rated 15 A.

●

Use of an extended code may not operate a 

printer normally by AC voltage descent.

●

During printing, do not shut off a power supply or 

do not pull out a power supply plug.

●

When you use it neither for consecutive holidays 

nor a travel for a long time, pull out a power cord.

●

Do not use the supplied power cord to the other 

products.

Turning On the Power

1 

Plug the AC cable (1) into the AC power 

socket of your printer.

1

2 

Plug the AC cable into the electric 

socket.

3 

Hold down the power switch (2) for 

about 1 second to turn on the power.

2

The Power switch LED indicator lights up when 

the printer turns on. The message “Ready To 

Print” is displayed in the operator panel once 

printer is ready.