Chapter 8: Advanced Administration Tasks
Agent configuration screens
198
Agent
configuration
screens
This section contains information on configuring the Authentication Engine,
changing logging settings, and changing the authentication policy.
Complete details for configuring and using agents are found in the
SafeWord
Agent Administration Guide
.
Configuring the Authentication Engine
1
For the IAS/NPS, Web Interface, CAG, and Domain Login Agents, click the
Authentication engine
button on the Agent Configuration window. For the
OWA Agent, click the
Configure
button on the Authentication Engine
portion of the Agent Configuration window. The Authentication Settings
window appears.
Figure 123:
Authenticati
on Settings window
2
In the
Host name/IP address
field, enter the host name or IP address of the
machine to which the agent will send authentication requests (name/IP
address of machine on which the SafeWord Server is installed).
3
In the
Port
field, enter the port number on which the Authentication Engine
(Authentication Server) will listen for requests.
This port number must match the port number specified for the Authentica-
tion Engine.
4
Click
Save
, and the server appears in the Configured Locations list.
5
Click
OK
.
Removing servers
To remove servers from the Configured Locations list, select the server name
from the list, click the
Remove
button, and then click
OK
.
Important: If you are configuring multiple servers, repeat the same steps for each
server you are configuring.