Chapter 2: Installing and Activating SafeWord 2008
Installing SafeWord 2008
26
Figure 13:
Restart IAS
window
Once you click Yes, the IAS service will restart, and you can skip to section
“Finishing the installation”.
Finishing the installation
During installation, windows will appear and disappear, and installation will take
several minutes to complete. The InstallShield Wizard Complete window
appears when the installation is finished.
If IAS/NPS was installed on Server 2008, and/or the DLA was selected for
installation, you will be prompted to restart the machine.
The basic software installation is now complete, but you must activate your
SafeWord 2008 software before you can use it.
Refer to the section, “Activating SafeWord 2008” on page 27 to complete the
procedure.
Note:
If you do not have Internet access, updates must be applied from an FTP
image. See
www.aladdin.com/sw-support
to contact Technical Support for
directions on how to get the necessary image.