Chapter 2: Installing and Activating SafeWord 2008
Activating SafeWord 2008
31
Activating SafeWord 2008 on a remote ADUC installation
If ADUC is installed on a machine different than the machine on which the
SafeWord server is running, the following additional activation steps are
necessary:
Note:
If SafeWord is installed on a 64 bit OS, the servers installation directory and
the SafeWord 2008 Management Console are found in the C:\Program Files (x86)
directory structure.
1
On the system where ADUC is installed, browse to the location where the
key.html
file is stored (
<
Install_Dir>
\Import Data)
.
2
Copy
key.html
into the following subdirectory on the SafeWord system:
<
Install_Dir
>
\
SERVERS\AdminServer\activation.
Important: Ensure the file name is
key.html
. Using any variation (key.htm or
key.html.html, for instance) will cause the activation to fail.
3
Restart the SafeWord Administration Server and Authentication Engine by
browsing to
Start > Programs > Administrative Tools > Services
.
4
Right click on
SafeWord Administration Server
and select
Restart
(repeat
for the
Authentication Engine
).
The successfully processed license file will be renamed
key.activated.html
.
Verifying your activation in ADUC
Your SafeWord 2008 registration and activation are complete, but you may
verify the success of the activation by doing the following:
1
(If not already open) Launch ADUC.
2
Right-click the SafeWord folder in the Console, and select
About
SafeWord
.
3
Verify that the Product Serial Number in the Serial Number field is correct.
4
Browse to
<
Install_Dir
>\SERVERS\AdminServer\activation
. The
successfully processed license file is now renamed
key.activated.html
.