60
|
Maintenance
3.
Grasp the handles on the toner cartridge and pull to remove the
cartridge from the printer.
4.
Take a new toner cartridge out of its package.
5.
Holding both handles on the toner cartridge, thoroughly rock it from side
to side to evenly distribute the toner.
6.
Place the toner cartridge on a flat surface, as shown, and remove the
paper covering the toner cartridge by removing the tape.
7.
Ensure that the color of the toner cartridge matches the color slot and
then grasp the handles on the toner cartridge. Insert the cartridge until it
clicks into place.
8.
Close the front cover. Ensure the cover is securely latched, and then
turn the printer on.
Clearing the Toner Empty message
When the
Toner Empty
message appears you can configure not to see this
message again not to disturb you.
1.
Press
Menu
(
)
until
System Setup
appears on the bottom line of the
display and press
OK
.
2.
Press the Scroll buttons until
Maintenance
appears and press
OK
.
3.
Press the Scroll buttons until
CLR Empty Msg.
appears and press
OK
.
4.
Press the left/right arrow until the color menu you want appears on
display and press
OK
.
5.
Select
On
and press
OK
.
6.
Now the
Toner Empty
message does not appear but the
Replace
Toner
message will remain for reminding you that the new cartridge
needs to be installed for quality.
When you open the front cover, be careful not to touch the underneath
of the control panel (the lower part of the fuser unit). The temperature of
the fuser unit might be high and could damage your skin.
When you open the front cover and work inside the printer, it is highly
recommend that you remove the paper transfer belt first. Because the
work you do could contaminate the paper transfer belt.
•
Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
•
To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
If toner gets on your clothing, wipe it off with a dry cloth and wash
it in cold water. Hot water sets toner into fabric.
If the front cover is not completely closed, the printer will not
operate.
•
Once you have selected
On
, this setting will be permanently
written to the memory of the toner cartridge, and this menu will be
disappeared from the
Maintenance
menu.
•
You can keep printing but the quality cannot be guaranteed, and
the product support is no longer provided.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
