Troubleshooting
|
67
In the fuser unit area
If paper is jammed in the fuser unit area, follow the next steps to release the
jammed paper.
1.
Open the scan unit.
2.
Open the inner cover using the handle.
3.
Open the inner cover using the handle on it and carefully take the
jammed paper out of the printer.
4.
Pull up the paper jam lever to loose the fusing part of the fuser unit and
carefully take the jammed paper out of the printer.
5.
Press down the paper jam lever to fasten the fusing part.
6.
Close the inner cover.
7.
Lowering down the scan unit gently and slowly until it is completely
closed. Ensure that it is securely latched.
Be careful not to pinch your fingers!
Do not touch the fuser inside the inner cover. It is hot and could
cause burns! The fuser's operating temperature is 180
°
C (356
°
F).
Take care when removing paper from the printer.
If the scan unit is not completely closed, the printer will not
operate.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
