![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-104.png)
Be sure not to put anything on top of the
photo sensor
q
A
located on the top of the
instrument panel. The photo sensor con-
trols the autolight; if it is covered, the
photo sensor reacts as if it is dark and the
headlights will illuminate.
Headlight beam select
q
1
To select the low beam, put the lever
in the neutral position as shown.
q
2
To select the high beam, push the
lever forward while the switch is in the
position. Pull it back to select
the low beam.
q
3
Pulling the lever toward you will flash
the headlight high beam even when
the headlight switch is in the OFF po-
sition.
Battery saver system
O
When the headlight switch is in the
or
position while the igni-
tion switch is in the ON position, the
lights will automatically turn off 5 min-
utes after the ignition switch has been
pushed to the OFF position.
O
When the headlight switch remains in
the
or
position after the
lights automatically turn off, the lights
will turn on when the ignition switch is
pushed to the ON position.
CAUTION
O
When you turn on the headlight switch
again after the lights automatically turn
off, the lights will not turn off automati-
cally. Be sure to turn the light switch to
the OFF position when you leave the ve-
hicle for extended periods of time, other-
wise the battery will be discharged.
O
Never leave the light switch on when the
engine is not running for extended pe-
riods of time even if the headlights turn
off automatically.
SAA0642A
SIC3269
2-36
Instruments and controls
w
06.7.27/V36-D
X