![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-299.png)
set your desired cruising speed. Pushing
the MAIN switch again will turn the
system completely off.
When the ignition switch is pushed to the
OFF position, the system is also automati-
cally turned off. To use the Intelligent
Cruise Control again, quickly push and re-
lease the MAIN switch (vehicle-to-vehicle
distance control mode) or push and hold
it (conventional cruise control mode)
again to turn it on.
CAUTION
To avoid accidentally engaging cruise con-
trol, make sure to turn the ON/OFF switch off
when not using the Intelligent Cruise Con-
trol.
To set cruising speed,
accelerate your ve-
hicle to the desired speed, push the
SET/COAST switch and release it. (The
SET indicator will come on in the display.)
Take your foot off the accelerator pedal.
Your vehicle will maintain the set speed.
O
To pass another vehicle,
depress the
accelerator pedal. When you release
the pedal, the vehicle will return to
the previously set speed.
O
The vehicle may not maintain the set
speed when going up or down steep
hills. If this happens, manually main-
tain vehicle speed.
To cancel the preset speed,
use any of the
following methods:
a) Push the CANCEL button. The SET indi-
cator will go out.
b) Tap the brake pedal. The SET indicator
will go out.
c) Turn the MAIN switch off. Both the
CRUISE indicator and SET indicator will
go out.
To reset at a faster cruising speed,
use one
of the following three methods:
a) Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
b) Push
and
hold
the
RESUME/
ACCELERATE set switch. When the ve-
hicle attains the speed you desire, re-
lease the switch.
c) Push,
then
quickly
release
the
RESUME/ACCELERATE switch. Each
time you do this, the set speed will in-
crease by about 1 MPH (1.6 km/h).
To reset at a slower cruising speed,
use
one of the following three methods:
a) Lightly tap the brake pedal. When the
SSD0620
Starting and driving
5-39
w
06.7.27/V36-D
X