![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-088.png)
c) Avoid steep uphill grades.
d) If possible, reduce the amount of
cargo being hauled or towed.
The malfunction indicator light may
stop blinking and remain on.
Have the vehicle inspected by an
INFINITI dealer. You do not need to
have your vehicle towed to the dealer.
CAUTION
Continued vehicle operation without having
the emission control system checked and re-
paired as necessary could lead to poor drive-
ability, reduced fuel economy, and possible
damage to the emission control system.
Security indicator light
The light blinks when the ignition switch
is in the LOCK position. This function indi-
cates the security system equipped on
the vehicle is operational.
If the security system is malfunctioning,
this light will remain on while the ignition
switch is in the ON position. For addi-
tional information, see “Security system”
later in this section.
Slip indicator light
This indicator will blink when the VDC
system or the traction control system is
operating, thus alerting the driver to the
fact that the road surface is slippery and
the vehicle is nearing its traction limits.
Turn signal/hazard indicator
lights
The light flashes when the turn signal
switch lever or hazard switch is turned
on.
Vehicle Dynamic Control
(VDC) off indicator light
The light comes on when the vehicle dy-
namic control off switch is pushed to OFF.
This indicates that the vehicle dynamic
control system and traction control
system are not operating. When the ve-
hicle dynamic control off indicator light
and slip indicator light come on with the
vehicle dynamic control system turned on,
this light alerts the driver to the fact that
the vehicle dynamic control system’s fail-
safe mode is operating, for example the
vehicle dynamic control system may not
be functioning properly. Have the system
checked by an INFINITI dealer. If an abnor-
mality occurs in the system, the vehicle
dynamic control system function will be
canceled but the vehicle is still driveable.
For additional information, see “Vehicle
Dynamic Control (VDC) system” in the “5.
Starting and driving” section of this
manual.
AUDIBLE REMINDERS
Key reminder chime
A chime will sound if the driver side door
is opened while the ignition switch is
pushed to the ACC position or pushed to
the OFF or LOCK position with the Intelli-
gent Key left in the Intelligent Key port.
Make sure the ignition switch is pushed
to the OFF position, and take the Intelli-
gent Key with you when leaving the ve-
hicle.
Light reminder chime
A chime will sound when the driver side
door is opened with the light switch in
the
or
position, and the igni-
tion switch is pushed to the ACC position.
Turn the light switch off when you leave
the vehicle.
2-20
Instruments and controls
w
06.7.27/V36-D
X