![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-038.png)
4. For child restraints that are equipped
with webbing mounted attachments,
remove any additional slack from the
anchor attachments. Press downward
and rearward firmly in the center of
the child restraint with your knee to
compress the vehicle seat cushion and
seatback while tightening the webbing
of the anchor attachments.
5. If the child restraint is equipped with
a top tether strap, route the top tether
strap and secure the tether strap to
the tether anchor point. See “Top
tether strap child restraint” in this
section.
6. Before placing the child in the child
restraint, hold child restraint near the
LATCH attachment and use force to
push the child restraint from side to
side, and tug it forward to make sure
that it is securely held in place. It
should not move more than 1 in (25
mm). If it does move more than 1 in
(25 mm), pull again on the anchor at-
tachments to further tighten the child
restraint. If you are unable to properly
secure the restraint, move the re-
straint to another seating position and
try again, or try a different child re-
straint. Not all child restraints fit in all
types of vehicles.
7. Check to make sure the child restraint
is properly secured prior to each use.
If the child restraint is loose, repeat
steps 3 through 6.
SSS0647
Front facing − step 4
SSS0638
Front facing − step 6
1-22
Safety — Seats, seat belts and supplemental restraint system
w
06.7.27/V36-D
X