![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-042.png)
seat. Always follow the child restraint
manufacturer’s instructions.
The back of the child restraint should
be secured against the seatback. If
necessary, adjust or remove the head
restraint (front passenger seat only) to
obtain the correct child restraint fit.
See “Head restraint” in this section.
If the head restraint is removed, store
it in a secure place. Be sure to install
the head restraint when the child re-
straint is removed. If the seating posi-
tion does not have an adjustable head
restraint and it is interfering with the
proper child restraint fit, try another
seating position or a different child re-
straint.
3. Route the seat belt tongue through the
child restraint and insert it into the
buckle until you hear and feel the
latch engage. Be sure to follow the
child restraint manufacturer’s instruc-
tions for belt routing.
4. Pull the shoulder belt until the belt is
fully extended. At this time, the seat
belt retractor is in the automatic lock-
ing mode (child restraint mode). It re-
verts to emergency locking mode
when the seat belt is fully retracted.
SSS0360B
Front facing — step 3
SSS0651
Front facing — step 4
1-26
Safety — Seats, seat belts and supplemental restraint system
w
06.7.27/V36-D
X