![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-037.png)
CHILD RESTRAINT INSTALLATION
USING LATCH
WARNING
O
Attach LATCH compatible child re-
straints only at the locations shown. For
the LATCH lower anchor locations, see
“Lower Anchors and Tethers for CHildren
System (LATCH)” in this section. If a
child restraint is not secured properly,
your child could be seriously injured or
killed in an accident.
O
The LATCH anchors are designed to
withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstance are they to be used for
adult seat belts or harnesses.
O
Inspect the lower anchors by inserting
your fingers into the lower anchor area
and feeling to make sure there are no ob-
structions over the LATCH anchors, such
as seat belt webbing or seat cushion ma-
terial. The child restraint will not be se-
cured properly if the LATCH anchors are
obstructed.
Front-facing
Follow these steps to install a front-facing
child restraint using LATCH:
1. Position the child restraint on the
seat. Always follow the child restraint
manufacturer’s instructions.
2. Secure the child restraint anchor at-
tachments to the LATCH lower an-
chors.
3. The back of the child restraint should
be secured against the vehicle seat-
back. If the seating position does not
have an adjustable head restraint and
it is interfering with the proper child
restraint fit, try another seating posi-
tion or a different child restraint.
SSS0645
Front facing — step 2
SSS0646
Front facing − step 2
Safety — Seats, seat belts and supplemental restraint system
1-21
w
06.7.27/V36-D
X