![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-036.png)
LATCH child restraints generally require
the use of a top tether strap. See “Top
tether strap child restraint” in this section
for installation instructions.
When installing a child restraint, carefully
read and follow the instructions in this
manual and those supplied with the child
restraint. See “Child restraint installation
using LATCH” in this section.
TOP TETHER STRAP CHILD
RESTRAINT
If the manufacturer of your child restraint
requires the use of a top tether strap, it
must be secured to an anchor point.
WARNING
Child restraint anchor points are designed to
withstand only those loads imposed by cor-
rectly fitted child restraints. Under no cir-
cumstances are they to be used for adult
seat belts or harnesses.
Top tether anchor point locations
Anchor points are located on the rear par-
cel shelf.
Installing top tether strap
First, secure the child restraint with the
seat belt or LATCH (rear outboard seat po-
sitions only), as applicable.
Flip up the anchor cover from the anchor
point which is located directly behind the
child seat. Position the top tether strap
over the top of the seatback and secure it
to the tether anchor bracket that provides
the straightest installation. Tighten the
strap according to the manufacturer’s in-
structions to remove any slack.
If you have any questions when installing
a top tether strap child restraint on the
rear seat, consult your INFINITI dealer for
details.
SSS0644
LATCH rigid attachment
SSS0675
1-20
Safety — Seats, seat belts and supplemental restraint system
w
06.7.27/V36-D
X