![background image](/i/infiniti/147957/infiniti-g35-sedan-2007/h/infiniti-g35-sedan-2007-091.png)
INDICATORS FOR OPERATION
1. Engine start operation indicator
(Automatic Transmission models)
This indicator appears when the selector
lever is in the P position.
This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed.
2. Steering lock release
malfunction indicator
This indicator appears when the steering
wheel cannot be released from the LOCK
position.
If this indicator appears, push the push-
button ignition switch while lightly
turning the steering wheel right and left.
3. Intelligent Key insertion
indicator
This indicator appears when the Intelli-
gent Key needs to be inserted into the In-
telligent Key port. (For example, the Intel-
ligent Key battery is discharged.)
If this indicator appears, insert the Intelli-
gent Key into the Intelligent Key port in
the correct direction. See “Push-button ig-
nition switch” in the “5. Starting and driv-
ing” section.
4. Intelligent Key removal
indicator
This indicator appears when the driver’s
door is opened with the ignition switch in
the LOCK position and the Intelligent Key
placed in the Intelligent Key port. A key
reminder chime also sounds.
If this indicator appears, remove the Intel-
ligent Key from the Intelligent Key port
and take it with you when leaving the ve-
hicle.
5. NO KEY warning
This warning appears in either of the fol-
lowing conditions.
No key inside the vehicle:
The warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the ignition switch in the
ACC or ON position. Make sure that the
Intelligent Key is inside the vehicle.
Unregistered Intelligent Key:
The warning appears when the ignition
switch is pushed from the LOCK position
and the Intelligent Key cannot be recog-
nized by the system. You cannot start the
engine with an unregistered key. Use the
registered Intelligent Key.
See “Intelligent Key system” in the “3.
Pre-driving checks and adjustments” sec-
tion for more details.
6. SHIFT “P” warning (Automatic
Transmission models)
This warning appears when the ignition
switch is pushed to stop the engine with
the selector lever in any position except
the P position.
If this warning appears, move the selector
lever to the P position or push the igni-
tion switch to the ON position.
An inside warning chime will also sound.
See “Intelligent Key system” in the
“3. Pre-driving checks and adjustments”
section.
7. “PUSH” warning (Automatic
Transmission models)
This warning appears when the selector
lever is moved to the P position with the
ignition switch in the ACC position after
the SHIFT “P” warning appears.
Instruments and controls
2-23
w
06.7.27/V36-D
X