![background image](/i/line-6/140898/line-6-pod-hd500/h/line-6-pod-hd500-083.png)
FX Models
7•11
Common Parameters
The following parameters are common to most Delay FX Models.
•
Time:
Adjusts the delay/repeat time, with higher settings providing longer delays.
Time can be adjusted to a
MS
value or
Note Division
:
• Choosing a
MS
value provides a specific time in milliseconds.
• Choosing a
Note Division
value provides a time that is based on the current
Tap
Tempo
(see
•
Fdbk (Feedback):
Sets the number of delayed repeats.
•
Depth:
Some delays include modulation. These will typically include a Depth
parameter to adjust the intensity of the pitch modulation applied to the repeats.
•
ModSpd:
Control the speed of the pitch modulation.
•
Mix:
Sets the balance of the “Dry” and “Wet” signals. At 0% no effect is added to
your signal; at 100% you will hear the delayed signal only.
Reverb Models
Reverb Models - Parameter Reference Table
Model
Parameters
Plate
Decay
PreDelay
Tone
Mix
Room
Decay
PreDelay
Tone
Mix
Chamber
Decay
PreDelay
Tone
Mix
Hall
Decay
PreDelay
Tone
Mix
Echo
Decay
PreDelay
Tone
Mix
Tile
Decay
PreDelay
Tone
Mix
Cave
Decay
PreDelay
Tone
Mix
Ducking
Decay
PreDelay
Tone
Mix
Octo
Decay
PreDelay
Tone
Mix
Spring
Decay
PreDelay
Tone
Mix
‘63 Spring
Decay
PreDelay
Tone
Mix
Particle Verb
Dwell
Condition
Gain
Mix