- 133 -
Cleaning
5
5.
Maintenance
●
●
Cleaning
This section explains how to clean each part of your printer.
Cleaning the Surface of the
Printer
Note
●
Do not use benzine, thinners, or alcohol as a cleaning
agent. They may damage the plastic parts of the printer.
●
Do not lubricate your printer with oil.
1
Turn off your printer by pressing the
power switch.
Reference
●
“Turning On/Off the Power” P.28
2
Wipe the surface of the printer with a
soft cloth lightly moistened with water or
neutral detergent.
3
Dry the surface of the printer with a dry
soft cloth.
Cleaning LED Heads
Clean the LED heads if vertical lines appear,
images are fading vertically, or the periphery of
letters is smudged in the printouts. Dirt on the
LED heads may also cause paper jams.
Note
●
Do not use methyl alcohol or thinners as a cleaning agent.
They may damage the LED heads.
●
Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1,500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
1
Turn off your printer by pressing the
power switch.
Reference
●
“Turning On/Off the Power” P.28
2
Insert your finger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
Note
● Open the front cover gently. If you open it rapidly,
the MP Tray may open.
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
