Introduction
_ 23
Stop/Clear button
By pressing
Stop/Clear
button, you can do the following functions.
FUNCTION
DESCRIPTION
Printing a configuration
report
In ready mode, press and hold this button
long enough (about two seconds) until the
Status LED
blinks slowly, and release the
button (See "To print a configuration report"
Printing a network
configuration report
(SCX-3205W(K) only)
In ready mode, press and hold this button for
four seconds until the
Status LED
blinks fast,
and release the button (See "Printing a
network configuration report" on page 30).
Supplies information
report
In the ready mode, press and hold this button
for about 6 seconds until the
Status LED
is
on, and release (See "To print a supplies
information report" on page 24).
Canceling print job
Press
Stop/Clear
button during a
operation. The print job is cleared from both
the machine and the computer and then the
machine returns to ready mode. This may
take some time depending on the size of the
print job.
Power button
By pressing
Power
button, you can turn the machine on or off.
Turning on the machine
1.
Plug in the power cord.
2.
Press
Power
button on the control panel.
When the machine is powered on, you can see LED looping on the
display. Then, the machine is in ready mode.
If you want to turn the power off, press and hold this button for
about two seconds.
