Wireless network setup (SCX-3205W(K))
_ 38
SETTING A WIRELESS NETWORK WITH USB
CABLE
Refer to your network administrator, or the person that set up your
wireless network, for information about your network configuration.
Installing the machine on a wireless network with an
access point (Windows)
Items to prepare
Ensure you have next items ready.
•
Access point
•
Network-connected computer
•
Software CD that provided with your machine
•
The machine installed with a wireless interface
•
USB cable
Creating the infrastructure network in Windows
When the items are ready, follow below steps:
1.
Check whether the USB cable is connected to the machine.
2.
Turn on your computer, access point and machine.
3.
Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation
window appears.
•
If the installation window does not appear, click
Start
and then
Run
. Type X:\
Setup.exe
, replacing “X” with the letter which
represents your CD-ROM drive. Click
OK
.
•
If you use Windows Vista, Windows 7 or Windows Server 2008
R2 click
Start
>
All programs
>
Accessories
>
Run
.
Type X:\
Setup.exe
replacing “X” with the letter which represents
your CD-ROM and click
OK
.
•
If the
AutoPlay
window appears in Windows Vista, Windows 7 or
Windows Server 2008 R2, click
Run
Setup.exe
in
Install or run
program
field, and click
Continue
or
Yes
in the
User Account
Control
windows.
4.
Select the
Wireless Setting and Installation
option.
•
Install Now:
First you must configure the wireless network
settings of your printer to print through wireless.
•
Wireless Setting and Installation:
Configure the wireless
network settings of your printer with a USB cable then install the
printer driver. Press this button to set up the wireless connection
if you have not set up the wireless connection before.
5.
Read
License Agreement
, and select
I accept the terms of the
License Agreement
. Then, click
Next
.
6.
The software searches the wireless network.
If the searching has failed, you may check if the USB cable is
connected between the computer and machine properly, and
follow the instruction on the window.
7.
After searching, the window shows the wireless network devices.
Select the name (SSID) of access point you are using and click
Next
.
If you cannot find out the network name you want to choose, or
if you want to set the wireless configuration manually, click
Advanced Setting
.
•
Enter the wireless Network Name:
Type the SSID of
access point you want (SSID is case-sensitive).
•
Operation Mode:
Select
Infrastructure
.
•
Authentication:
Select an authentication type.
Open System:
Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key:
Authentication is used. A device that has a
proper WEP key can access the network.
WPA Personal or WPA2 Personal:
Select this option to
authenticate the print server based on WPA Pre-Shared
Key. This uses a shared secret key (generally called Pre
Shared Key pass phrase) which is manually configured on
the access point and each of its clients.
•
Encryption:
Select the encryption. (None, WEP64,
WEP128, TKIP, AES, TKIP AES)
•
Network Key:
Enter the encryption network key value.
•
Confirm Network Key:
Confirm the encryption network
key value.
•
WEP Key Index:
If you are using the WEP Encryption,
select the appropriate
WEP Key Index
.
The wireless network security window does appear when the
access point has security setting.
The wireless network security window appears. The window
may differ according to its security mode, WEP or WPA.
•
In case of WEP
Select
Open System
or
Shared Key
for the authentication
and enter WEP security key. Click
Next
.
WEP (Wired Equivalent Privacy) is a security protocol
preventing unauthorized access to your wireless network.
WEP encrypts the data portion of each packet exchanged
on a wireless network using a 64-bit or 128-bit WEP
encryption key.
•
In case of WPA
Enter the WPA shared key and click
Next
.
WPA authorizes and identifies users based on a secret key
that changes automatically at regular intervals. WPA also
uses TKIP (Temporal Key Integrity Protocol) and AES
(Advanced Encryption Standard) for data encryption.
8.
The window shows the wireless network setting and check if settings
are right. Click
Next
.
•
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is
shown in the window. However, if it shows Static, click
Change
