Media and tray
_ 49
the warranty or service agreements.
The amount of paper put into the tray may differ according to
media type used (See "Print media specifications" on page 93).
•
Using inflammable print media can cause a fire.
•
Use designated print media (See "Print media specifications" on
The use of inflammable media or foreign materials left in the printer
may lead to overheating of the unit and, in rare cases may cause a
fire.
Media sizes supported in each mode
MODE
SIZE
TYPE
SOURCE
Copy mode
Letter, A4,
Legal, Oficio, US
Folio, Executive,
JIS B5, A5
For details about
paper type, click
the following link
Tray
Simplex
printing
For details about
paper size, click
the following link
For details about
paper type, click
the following link
Tray
Duplex
printing
(Manual)
a
a.75 to 90 g/m
2
(20~24 lbs bond) only (See "Print media specifications"
Letter, A4,
Legal, US Folio,
Oficio
Plain, Color,
Preprinted,
Recycled, Bond,
Archive
Manual feeding
in the tray
CHANGING THE TRAY SIZE
The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
3
1
2
1
Tray
2
Paper length guide
3
Paper width guide
1.
Open front door and pinch the paper length guide and pull it out to
extend the tray.
Because the machine is very light, it can move when you open and
close the tray or install and remove the toner cartridge. Be careful
not to move the machine when performing these tasks.
2.
Flex or fan the edge of the paper stack to separate the pages before
loading the paper. Insert the paper into the tray.
3.
Load paper with the print side facing up. Make sure that all four corners
are flat in the tray.
Do not overload the tray. Ensure that the paper level is below the
paper capacity mark on the inside of the tray.
