Wireless network setup (SCX-3205W(K))
_ 40
name you want (SSID is case-sensitive).
•
Operation Mode:
Select
Ad-hoc
.
•
Channel:
Select the channel.
•
Authentication:
Select an authentication type.
Open System:
Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key:
Authentication is used. A device that has a
proper WEP key
can access the network.
•
Encryption:
Select the encryption. (None, WEP64,
WEP128)
•
Network Key:
Enter the encryption network key value.
•
Confirm Network Key:
Confirm the encryption network
key value.
•
WEP Key Index:
If you are using the WEP Encryption,
select the appropriate
WEP Key Index
.
The wireless network security window appears when the
ad-hoc network has security setting.
The wireless network security window appears. Select
Open
System
or
Shared Key
for the authentication and click
Next
.
•
WEP (Wired Equivalent Privacy) is a security protocol
preventing unauthorized access to your wireless network.
WEP encrypts the data portion of each packet exchanged
on a wireless network using a 64-bit or 128-bit WEP
encryption key.
8.
The window which shows the wireless network setting appears.
Check the settings and click
Next
.
Before entering the IP address for the machine, you must know
the computer’s network configuration information.
If the
computer’s network configuration is set to DHCP, the wireless
network setting should also be DHCP. Likewise, if the
computer’s network configuration is set to Static, the wireless
network setting should also be Static.
If your computer is set to DHCP and you want to use Static
wireless network setting, you must contact the network
administrator to get the static IP address.
•
For the DHCP method
If the IP address assignment method is DHCP, check if
DHCP is shown in the
Wireless Network Setting Confirm
window. However, if it shows Static, click
Change TCP/IP
to change the assignment method to
Receive IP address
automatically (DHCP)
.
•
For the Static method
If the IP address assignment method is Static, check if
Static is shown in the
Wireless Network Setting Confirm
window. However, if it shows DHCP, click
Change TCP/IP
to enter the IP address and other network configuration
values for the machine.
Example)
If computer’s network information is as below:
-
IP address: 169.254.133.42
-
Subnet Mask: 255.255.0.0
Machine’s network information should be as below:
-
IP address: 169.254.133. 43 (Use computer’s IP
address, with changed last three digits.)
-
Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
-
Gateway: 169.254.133.1 (Change the last three digits
from IP address of your machine to 1.)
9.
When the wireless network setting is completed, disconnect the USB
cable between the computer and machine. Click
Next
.
If the
Change PC Network Setting
window appears, follow
the steps on the window.
Click
Next
if you are finished the computer’s wireless network
settings.
If you set the computer’s wireless network as DHCP, it will take
several minutes to receive the IP address.
10.
The
Wireless Network Setting Complete
window appears.
Select
Yes
if you accept the current settings and continue the setup
procedure.
Select
No
if you want to return to the beginning screen.
Then, click
Next
.
11.
Click
Next
when the
Confirm Printer Connection
window appears.
12.
Select the components to be installed. Click
Next
.
After selecting the components, you can also change the machine
name, set the machine to be shared on the network, set the machine
as the default machine and change the port name of each machine.
Click
Next
.
13.
After the installation is finished, a window asking you to print a test
page appears. If you want to print a test page, click
Print a test
page
.
Otherwise, just click
Next
and skip to step 15.
14.
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
15.
To register as a user of the machine in order to receive information
from Samsung, click
On-line Registration
.
16.
Click
Finish
.
Installing the machine on a wireless network with an
access point (Macintosh)
Items to prepare
Ensure you have next items ready.
•
Access point
•
Network-connected computer
•
Software CD that provided with your machine
•
The machine installed with a wireless network interface
•
USB cable
Creating the infrastructure network in Macintosh
When the items are ready, follow below steps:
1.
Check whether the USB cable is connected to the machine.
2.
Turn on your computer, access point and machine.
3.
Insert the supplied software CD into your CD-ROM drive.
4.
Double-click the CD-ROM icon that appears on your Macintosh
desktop.
5.
Double-click the
MAC_Installer
folder.
6.
Double-click the
Installer OS X
icon.
7.
Enter the password and click
OK
.
8.
The Samsung Installer window opens. Click
Continue
.
9.
Read the license agreement and click
Continue
.
10.
Click
Agree
to agree to the license agreement.
11.
Select
Easy Install
and click
Install
.
